T-D2 - 199,000 BTU Propane Indoor Non-Condensing

This 9007667005 Direct Vent Conversion Kit can be used to convert a conventional vent system to a direct vent (or sealed combustion) system. This is a CSA tested Takagi conversion kit. Install this conversion kit in accordance with Takagi's installation instructions and any applicable codes.

For Use with the following models:

T-KJr2/U-IN, T-K4/U-IN, T-D2/U-IN

The 9007670005 Pipe Cover protects the plumbing pipes to the water heater from unexpected adjustments. This pipe cover is fixed to the bottom of the water heater, which hides the plumbing and improves the visual aspects of the whole installation for the water heater.

For Use with the following models:

T-KJr2U-IN, T-KJr2U-OS, T-K4-IN, T-K4-OS, T-K4U-IN, T-K4U-OS, T-D2-IN, T-D2-OS, T-D2U-IN, T-D2U-OS

The 9007603005 Remote Temperature Controller (TM-RE30) allows the output temperature to be adjusted beyond the factory settings, and works as a diagnostic tool for error codes.
(Not compatible with the Ultra-Low NOx models)

For Use with the following models:

TK-110C-NI, TK-310C-NI, TK-510C-NI, T-D2-IN, T-D2-OS, T-M32, T-M32 ASME, T-M50, T-M50 ASME

The 9007604005 Lead Free Isolation Valves & Pressure Relief Valves are used to isolate a unit for service. The Pressure Relief Valve is to help protect the unit and release if the pressure in the tankless water heater or hot water system exceeds 150 psi and up to 200,000 BTUs. For 3/4" water lines. (1953 Compliant)

For Use with the following models:

TK-110C-NI, TK-310C-NI, TK-510C-NI, T-KJr2/U, T-K4/U, T-D2/U, T-H3M, T-H3J, T-H3S, T-H3

Did you know more than 85% of American homes have hard water and that hard water scale is a leading cause of failure for tankless water heaters?

The Product Preservers® Anti-Scale System protects your tankless water heater from damage due to scale formation. This system does not add chemicals to the water or require electricity. As water flows through the filter, hard water minerals form inactive scale crystals which flow through the water heater without sticking to the heat exchanger.

The system virtually maintenance free as the filter only needs to be changed every two years. Replacing the filter is easier, faster, and needs to be less frequently than using isolation valves to flush a water heater with a cleaning solution to remove scale buildup.